12U (24") Wall Cabinet
Ground Shipping or Will Call Only
|ADD TO CART TO ESTIMATE SHIPPING
This wall mount equipment cabinet is made for 19" racks.
- A Plexiglas front door that is field reversible to swing out from left to right.
- Locks that are installed in the front door and rear section. They are keyed differently.
- Made from carbon steel.
- Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel.
- The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.
- The dual swing unit provides access to the rear of the cabinet.
- The lift off style rear hinge allows separation of the rear section for easy installation.
- The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9.
- Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section.
- The sides of the center section are ventilated for maximum cooling.
- There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan.
- Can handle up to 100 lbs.
- Color is Black.
- Measures 24" Height x 24" Depth x 23" Width Has 22.5" of useable depth.
10/32 X 5/8 black screws can be ordered here HW155-13-1032-K
12/24 X 5/8 black screws can be ordered here HW155-14-1224-K
M6 X 16MM black screws can be ordered here HW155-60-M6-K
Nylon Trim Black Washers can be ordered here HW155-51-WASH-K
10/32 Cage Nuts can be ordered here HW155-12-1032-K
M6 Cage Nuts can be ordered here HW155-61-M6-K