This sturdy metal mounting bracket is designed to mount a 1U, 1.75", patch panel or other 1U high 19" item on a wall. The depth is 4" and the hinge allows the panel or equipment to swing out so that you may gain access to the back side.The color is black and 4 screws are included to mount your panel or equipment to the bracket.Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This sturdy metal mounting bracket is designed to mount two 1U, 1.75", patch panels or other 1U or 2U high 19" items on a wall. Most 48 port patch panels are 2U and can be used with this as well. The depth is 6" and the hinge allows the panel or equipment to swing out so that you may gain access to the back side.The color is black and 4 screws are included to mount your panel or equipment to the bracket. Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This sturdy metal mounting bracket is designed to mount three 1U, 1.75", patch panels or other 1U, 2U or 3U high 19" items on a wall. Most 48 port patch panels are 2U and can be used with this as well.The depth is 6" and the hinge allows the panel or equipment to swing out so that you may gain access to the back side.The color is black and 4 bare silver color screws are included to mount your panel or equipment to the bracket.Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This sturdy metal mounting bracket is designed to mount four 1U, 1.75" patch panels or other 1U, 2U, 3U or 4U high 19" items on a wall. Most 48 port patch panels are 2U and can be used with this as well.The depth is 4" and the hinge allows the panel or equipment to swing out so that you may gain access to the back side. The color is black and 4 bare silver color screws are included to mount your panel or equipment to the bracket.Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This sturdy metal mounting bracket is designed to mount four 1U, 1.75" patch panels or other 1U, 2U, 3U or 4U high 19" items on a wall. Most 48 port patch panels are 2U and can be used with this as well.The depth is 6" and the hinge allows the panel or equipment to swing out so that you may gain access to the back side. The color is black and 4 bare silver color screws are included to mount your panel or equipment to the bracket.Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This sturdy metal mounting bracket is designed to mount seven 1U, 1.75", devices or one 7U, 12.25", device. You can mount patch panels, cable management bars or any other 1U to 7U high 19" item on a wall with this bracket. The depth is 12" with no hinges. The color is black and 4 screws are included to mount your panel or equipment to the bracket. Additional black 10/32 X 5/8 screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 22" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This extended depth wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 22" Height x 25" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This extended depth wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 25" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 48" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mount equipment cabinet is made for 19" racks. Features include: - A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently. - Made from carbon steel. - Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet. - The lift off style rear hinge allows separation of the rear section for easy installation. - The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9. - Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section. - The sides of the center section are ventilated for maximum cooling. - There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan. - Can handle up to 100 lbs. - Color is Black. - Measures 24" Height x 24" Depth x 23" Width Has 22.5" of useable depth. 10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight or Will Call. Call for shipping cost quote. *** This wall mount equipment cabinet is made for 19" racks.Features include:- A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently.- Made from carbon steel.- Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet.- The lift off style rear hinge allows separation of the rear section for easy installation.- The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9.- Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section.- The sides of the center section are ventilated for maximum cooling.- There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 24" Depth x 23" WidthHas 22.5" of useable depth.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This wall mount equipment cabinet is made for 19" racks.Features include:- A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently.- Made from carbon steel.- Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet.- The lift off style rear hinge allows separation of the rear section for easy installation.- The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9.- Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section.- The sides of the center section are ventilated for maximum cooling.- There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan.- Can handle up to 100 lbs.- Color is Black.Measures 48" Height x 24" Depth x 23" WidthHas 22.5" of useable depth.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This pre-configured cabinet has everything you need to set up your networking rack.Contains:1 frame2 pair of cage nut rails2 solid side panels1 top with fan holes already drilled2 perforated doorsFeatures:- Comes with a heavy duty 14 gauge steel welded tubing construction which provides a 2000 lb. static load rating.- Made to withstand earthquakes up to Zone 4 seismic activity.- Is UL listed.- Comes with 2 pair mounting rails which are cage nut style, and punched on EIA 5/8-5/8-1/2" standard spacing and are fully adjustable from front to rear.- Has flush mounted removable doors that have perforated inserts that are field reversible without needing tools.- Has a flush mount fan top which allows for up to (4) 110 CFM fans to be placed on the cabinet top for maximum cooling.- Has an open base for a raised ventilation option.- The bottom corners are gusseted with both seismic tie downs and caster mount features.- Has four point leveling.- Color is Black.Fans for this cabinet are available for purchase separately under part #HW147-1.Measures 78" Height x 36" Depth x 24" WidthHas 34" of useable depth.Pallet dimensions are:89" Height x 41" Depth x 28" WidthTotal weight is 270 lbs.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This pre-configured cabinet has everything you need to set up your networking rack.Contains:1 frame2 pair of cage nut rails2 solid side panels1 top with fan holes already drilled2 perforated doorsFeatures:- Comes with a heavy duty 14 gauge steel welded tubing construction which provides a 2000 lb. static load rating.- Made to withstand earthquakes up to Zone 4 seismic activity.- Is UL listed.- Comes with 2 pair mounting rails which are cage nut style, and punched on EIA 5/8-5/8-1/2" standard spacing and are fully adjustable from front to rear.- Has flush mounted removable doors that have perforated inserts that are field reversible without needing tools.- Has a flush mount fan top which allows for up to (4) 110 CFM fans to be placed on the cabinet top for maximum cooling.- Has an open base for a raised ventilation option.- The bottom corners are gusseted with both seismic tie downs and caster mount features.- Has four point leveling.- Color is Black.Fans for this cabinet are available for purchase separately under part #HW147-1.Measures 84" Height x 36" Depth x 24" WidthHas 34" of useable depth.Pallet dimensions are:89" Height x 41" Depth x 28" WidthTotal weight is 270 lbs.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
This swing kit allows you the convert the rear mounting pan from a left hand swing to a right hand swing for the following cabinets:12U part #HW417-1218U part #HW417-1826U part #HW417-26Includes 3 hinges and can be easily installed with the factory pre-drilled holes.
This fan is a 110 CFM Axial fan. It comes with a 6' cord and is 115 Volts.It can be mounted in any of our cabinets that have fan holes in them.Has sealed bearings and two finger guards.
This cable management bar is zinc plated and made from 16 gauge carbon steel construction. It is 64.75" long.It is fully adjustable from front to rear.It can be mounted vertically to any cabinet that is 72" or taller.Provides holes at 1" intervals for cable ties.For mounting hardware:10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
