Features:Installs with a screw or nail.Nail included with standoff.Positions cables at a safe distance from nailing surface.Provides a neat, organized cable installation and prevents tangles.Positions both flat and round NM cables.Complies with 2005 NEC Arcticle 300-4d.Holds One 14/3 to One 10/3 and and Three 14/2 W/G to Three 10/3.
Features:Installs with a screw or nail.Positions cables at a safe distance from nailing surface.Positions cable 2" from a furring strip or 2x4 stud.Features positive lock to keep cables in place.Positions both flat and round NM cables.Complies with 2005 NEC Arcticle 300-4d.Holds: up to Five runs of 12/2 non-metallic sheathed cable, up to Eight runs of Cat 5e cable, up to Four runs of Cat 6 cable, or up to Five runs of Coaxial cable.
This cable support is easy to use. Simply position the support in the desired location and insert a sheet metal screw into a steel or wood stud or use a nail in a wood stud. Cable or cables can then be placed between the serrated forks. Install the mating washer over the serrated forks to secure the cable or cables. (Screws and nails are not included).Holds: up to Six 14/2 NM cables, up to Five 12/2 N/M cables, up to Four 10/2 NM cables or One 14/2 to 10/2 MC/AC cables.
This cable support is very handy. To install simply position the support in the desired location on the wood stud and drive in the nail. Then insert the cable or cables.Supports: up to Four 14/2 - 10/2 flat (any combination) and Two 14/3 - 10/3 (any combination) NM cables.
This cable support is very handy. To install simply position the support in the desired location on a metal or wood stud then tighten the self-tapping screw. Then insert the cable or cables. Comes with a #8 self-tapping sheet metal screw.Supports: up to Four 14/2 - 10/2 flat (any combination) and Two 14/3 - 10/3 (any combination) NM cables.
This cable spacer holds and centers a single or double row of cables to a 2 x 4.
This cable strap holds up to 5 runs of cable.
Includes a screw for attaching to wood or metal studs.
Listed for use in environmental air handling spaces per 2008 NEC code requirement 300-22(c).
Cable range is .420-.600.
