Condition:  New
Mfg:  Abergetty
P/N:  CN150-45-4

Wire entry holes are offset to meet the guidelines for wire separation in Category 6 networks. This is a 2 piece plug with an insert that allows you to easily install the wires. Once the wires are in, the insert placed inside the RJ45 connector and crimped with a standard RJ45 style crimp tool.

Condition:  New
Mfg:  Abergetty
P/N:  CN150-45-5

This is a 2-piece plug. The picture shows the top and bottom of the same plug.

Condition:  New
Mfg:  Platinum Tools
P/N:  100010C

Platinum Tools part #100010C

These EZ connectors simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order.

Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination.

Reducing the distance between the wire twists and contacts also improves performance.

Features:

*Through holes allow wire pairs to be inserted through front of connector for faster terminations.
*EZ to verify wire sequence.
*More reliable and higher performance.
*Works with sold or stranded wire- separate connectos not required, reducing inventory and confusion.
*Reduces scrap by eliminating wasted crimps.
*Simple one-piece design- bars or liners not required.
*FCC & RoHS compliant.
*UL rated.
*Manufactured in the USA. Patented.
*Made by Platinum Tools.

Condition:  New
Mfg:  Abergetty
P/N:  CN150-45-10

Condition:  New
Mfg:  Abergetty
P/N:  CN150-45-12

These plugs go with our part CB142-6FS-STRY-GY.

Condition:  New
Mfg:  Abergetty
P/N:  CN150-45-9

These plugs go with most standard CAT 6 Shielded Stranded cable but they will NOT work with our part CB142-6FS-STR-GY. If you want to make patch cables, use part CN150-45-12 to order plugs that will work with our part CB142-6FS-STR-GY.

Condition:  New
Mfg:  Platinum Tools
P/N:  100021C

Platinum Tools part #100021C

These EZ Shielded internal ground connectors simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order.

Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination.

Reducing the distance between the wire twists and contacts also improves performance.

Features:

*Through holes allow wire pairs to be inserted through front of connector for faster terminations.
*EZ to verify wire sequence.
*More reliable and higher performance.
*Works with sold or stranded wire- separate connectos not required, reducing inventory and confusion.
*Reduces scrap by eliminating wasted crimps.
*Simple one-piece design- bars or liners not required.
*FCC & RoHS compliant.
*UL rated.
*50 micro inch gold plate.
*Max cable OD: 0.260".
*Max conductor OD: 0.041".
*Manufactured in the USA. Patented.
*Made by Platinum Tools.

Condition:  New
Mfg:  Platinum Tools
P/N:  100023C

Platinum Tools part #100023C

These EZ Shielded external ground connectors simplify twisted pair terminations by allowing the wires to be inserted through the connector and out the front, to easily verify the proper wiring order.

Pulling the connector down over the cable jacket and seating it tightly in the rear of the connector optimizes electrical performance of the termination.

Reducing the distance between the wire twists and contacts also improves performance.

Features:

*Through holes allow wire pairs to be inserted through front of connector for faster terminations.
*EZ to verify wire sequence.
*More reliable and higher performance.
*Works with sold or stranded wire- separate connectos not required, reducing inventory and confusion.
*Reduces scrap by eliminating wasted crimps.
*Simple one-piece design- bars or liners not required.
*FCC & RoHS compliant.
*UL rated.
*50 micro inch gold plate.
*Max cable OD: 0.280".
*Max conductor OD: 0.041".
*Manufactured in the USA. Patented.
*Made by Platinum Tools.

Condition:  New
Mfg:  Abergetty
P/N:  CN372-3

OUT OF STOCK UNTIL 8/15/13!

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6CL

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6BK

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6BL

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6BN

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6GY

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6GN

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6RO

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6PK

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6PL

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6RD

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6W

Condition:  New
Mfg:  Abergetty
P/N:  CN160-6Y

Condition:  New
Mfg:  Platinum Tools
P/N:  100036

Made by Platinum tools, part #100036.

Comes in bags of 10 each.

These Snag Proof EZ strain reliefs are designed to specifically be crimped with EZ-RJ45 Connectors.

Technical Features:

* Prolongs patch cord life.
* Maintains the bend radius required for standards compliance.
* Terminations have a professionally finished look.
* By using these strain reliefs, you can achieve the look of a commercially molded patch cord with a field termination.
* No more snags or hang ups that cause tangled messes.
* Easier to unlock the connector when unplugging from a jack/port.
* UL and RoHS compliant.