Condition:  New
Mfg:  Abergetty
P/N:  HW187-50-1

These box extenders level and support the wiring device where the box is set back from the wall surface. It extends the box up to 1-1/2".

Available in Single Gang, 2-Gang, 3-Gang & 4-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-50-2

These box extenders level and support the wiring device where the box is set back from the wall surface. It extends the box up to 1-1/2".

Available in Single Gang, 2-Gang, 3-Gang & 4-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-50-3

These box extenders level and support the wiring device where the box is set back from the wall surface. It extends the box up to 1-1/2".

Available in Single Gang, 2-Gang, 3-Gang & 4-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-50-4

These box extenders level and support the wiring device where the box is set back from the wall surface. It extends the box up to 1-1/2".

Available in Single Gang, 2-Gang, 3-Gang & 4-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-51

These box extenders can be installed over a shallow box which will allow you to install larger devices by adding 5/8" or 5.3 cubic inches to the existing box volume.

It is paintable. Comes with 2 installation screws.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-52

These box extenders can be installed over a shallow box which will allow you to install larger devices by adding 5/8" or 10.5 cubic inches to the existing box volume.

It is paintable. Comes with 4 installation screws.

To work with 3-Gang or larger boxes, you can purchase part #HW187-52. Each coupler will extend the box an additional gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-53

Each coupler package (2 couplers one for the top and one for the bottom of the box) allows you to extend your box an additional gang. Works with part #HW187-52.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-54CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle and (1) standard GFCI face plate, (1) NM cable connector, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-54W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle and (1) standard GFCI face plate, (1) NM cable connector, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-55W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle and (1) standard GFCI face plate, (1) NM cable connector, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-55CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle and (1) standard GFCI face plate, (1) NM cable connector, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-56CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) 2-gang decorator wall plate, (2) NM cable connectors, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-56W

Box has a weatherproof-in-use cover, installed bug plugs, (1) 2-gang decorator wall plate, (2) NM cable connectors, block bushing with washer, and an in-place, disposable mud cover.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-57W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws & (1) NM cable connector.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-57CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws & (1) NM cable connector.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-58CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws & (1) NM cable connector.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-58W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws & (1) NM cable connector.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-59W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-59CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-60CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-60W

Box has a weatherproof-in-use cover, installed bug plugs, (1) standard duplex receptacle, (1) standard GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-61CL

Box has a weatherproof-in-use cover, installed bug plugs, (1)  standard double gang GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-61W

Box has a weatherproof-in-use cover, installed bug plugs, (1)  standard double gang GFCI face plate, installation screws , (1) NM cable connector & a roll of caulk.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-62CL

Box has a weatherproof-in-use cover, installed bug plugs, (1) double gang standard GFCI face plate, installation screws & (2) NM cable connectors.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-62W

Box has a weatherproof-in-use cover, installed bug plugs, (1) double gang standard GFCI face plate, installation screws & (2) NM cable connectors.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-27

These in boxes allow flush to the wall mounting of plasma or LCD TVs.

They work great because plugs and connectors stay inside the boxes without extending past the wall.

Comes in 1-Gang, 2-Gang, 3-Gang, or 4-Gang.

Color is White.

Optional cover sold separately under part #HW187-31.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-63-1

These non-metallic box kits are the easiest and fastest way to install a flat screen TV. They include two boxes and the necessary connections needed to install the TV and additional components.

You get a fully assembled recessed box, with pre-wired receptacle, device, flexible cored and cord grip.

All you need to do is cut two openings in the wall, near a power source. There's no need to cut into your framing
members or run power from a panel box.

The mounting wing screws hold the boxes secure against the way.

The plugs and connections stay inside the recessed boxes so TV mounts flush against the wall.

There is no mess because the wires stay hidden against the wall.

Comes with everything shown here.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-63-2

These non-metallic box kits are the easiest and fastest way to install a flat screen TV. They include two boxes and the necessary connections needed to install the TV and additional components.

You get a fully assembled recessed box, with pre-wired receptacle, device, flexible cored and cord grip.

All you need to do is cut two openings in the wall, near a power source. There's no need to cut into your framing
members or run power from a panel box.

The mounting wing screws hold the boxes secure against the way.

The plugs and connections stay inside the recessed boxes so TV mounts flush against the wall.

There is no mess because the wires stay hidden against the wall.

Comes with everything shown here.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-63-3

This Double Gang box has power/low voltage on the top and single gang box at the bottom.

These non-metallic box kits are the easiest and fastest way to install a flat screen TV. They include two boxes and the necessary connections needed to install the TV and additional components.

You get a fully assembled recessed box, with pre-wired receptacle, device, flexible cored and cord grip.

All you need to do is cut two openings in the wall, near a power source. There's no need to cut into your framing
members or run power from a panel box.

The mounting wing screws hold the boxes secure against the way.

The plugs and connections stay inside the recessed boxes so TV mounts flush against the wall.

There is no mess because the wires stay hidden against the wall.

Comes with everything shown here.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-63-4

This kit comes with an angled power side in recessed box.

This Double Gang box has power/low voltage on the top and single gang box at the bottom.

These non-metallic box kits are the easiest and fastest way to install a flat screen TV. They include two boxes and the necessary connections needed to install the TV and additional components.

You get a fully assembled recessed box, with pre-wired receptacle, device, flexible cored and cord grip.

All you need to do is cut two openings in the wall, near a power source. There's no need to cut into your framing
members or run power from a panel box.

The mounting wing screws hold the boxes secure against the way.

The plugs and connections stay inside the recessed boxes so TV mounts flush against the wall.

There is no mess because the wires stay hidden against the wall.

Comes with everything shown here.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-28

These in boxes allow flush to the wall mounting of plasma or LCD TVs.

They work great because plugs and connectors stay inside the boxes without extending past the wall.

Comes in 1-Gang, 2-Gang, 3-Gang, or 4-Gang.

Color is White.

Optional cover sold separately under part #HW187-31.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-35W

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-35S

These steel recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-35BK

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is Black.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-35KIT

This kit comes with (1) tamper-resistant duplex receptacle; (1) Decora Horizontal Entrance Plate (Part #SR503-W), (1) Decora Style Single Gang Insert (Part #WP302-1W) and (1) wall plate (Part #WP400-4W).

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-39

These non-metallic boxes for power and low voltage class 2 wiring work well for new construction. They have a two hour fire rating and are UL listed.

For wood stud installation, these brackets feature parked in place nails ready to use.

For metal stud installation, these brackets feature screw hols on either side of the front flange (screws are not included).

For raceway, the low voltage side provides a combo 1/2" and 3/4" KO.

Height 3.625"
Width 5.360"
Cubic In. Power side 20.2"

Condition:  New
Mfg:  Abergetty
P/N:  HW187-40

These non-metallic boxes for power and low voltage class 2 wiring work well for existing construction. They have a two hour fire rating and are UL listed.

They adjust to fit 1/4" to 1-1/2" thick wallboard, paneling or drywall.

For raceway, the low voltage side provides a combo 1/2" and 3/4" KO.

Makes for a fast and easy installation and protects cable from damage.

The mounting wing screws hold the box securely in place.

Includes installed NW connector on the power side.

Height 4.250"
Width 4.185"
Cubic In. Power side 17.0"

Condition:  New
Mfg:  Abergetty
P/N:  HW187-48

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-28

These in boxes allow flush to the wall mounting of plasma or LCD TVs.

They work great because plugs and connectors stay inside the boxes without extending past the wall.

Comes in 1-Gang, 2-Gang, 3-Gang, or 4-Gang.

Color is White.

Optional cover sold separately under part #HW187-31.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-36W

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-36BK

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is Black.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-36S

These steel recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-49

These recessed power and low voltage combo boxes easily install into new or existing walls.

They mount your TV or system components flush against the wall.

Available in 2-Gang or 3-Gang.

Color is White.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-32W

These 4-Gang TV boxes look great and mount TVs flush against the wall.

Offers power and low voltage in one side, or with the supplied separator; power in one side, and low voltage in one or more of the other openings.

Color is White. Width is 13". Made from Plastic.
UL listed.

Also comes in steel.

Easy to cover when not in use with optional cover. Order separately under part #HW187-34.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-32BK

These 4-Gang TV boxes look great and mount TVs flush against the wall.

Offers power and low voltage in one side, or with the supplied separator; power in one side, and low voltage in one or more of the other openings.

Color is Black. Width is 13". Made from Plastic.
UL listed.

Also comes in steel.

Easy to cover when not in use with optional cover. Order separately under part #HW187-34.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-29

These in boxes allow flush to the wall mounting of plasma or LCD TVs.

They work great because plugs and connectors stay inside the boxes without extending past the wall.

Comes in 1-Gang, 2-Gang, 3-Gang, or 4-Gang.

Color is White.

Optional cover sold separately under part #HW187-31.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-33S

These 4-Gang TV boxes look great and mount TVs flush against the wall.

Offers power and low voltage in one side, or with the supplied separator; power in one side, and low voltage in one or more of the other openings.

Also comes in plastic.

Easy to cover when not in use with optional cover. Order separately under part #HW187-34.

Condition:  New
Mfg:  Abergetty
P/N:  HW187-33BK

These 4-Gang TV boxes look great and mount TVs flush against the wall.

Offers power and low voltage in one side, or with the supplied separator; power in one side, and low voltage in one or more of the other openings.

Also comes in plastic.

Easy to cover when not in use with optional cover. Order separately under part #HW187-34.

Condition:  New
Mfg:  Abergetty
P/N:  HW190-6

1-Gang plastic switch box for non-metallic cable; 1-3/4” depth & extra room to the side. May be used with adhesive and mounted behind paneling or other wall surfaces.

These plastic switch boxes are great for manufactured housing or RV's.

Condition:  New
Mfg:  Abergetty
P/N:  HW190-7

1-Gang plastic switch box for non-metallic cable; 1-1/2” depth & extra room to the side. May be used with adhesive and mounted behind paneling or other wall surfaces.

These plastic switch boxes are great for manufactured housing or RV's.