Features:* Heavy duty steel upright channels* Extruded aluminum top and bottom angles* 19" wide rack mount* Front and rear upright mounting holes tapped #12-24 on EIA Standard spacing* Supplied with (2) top angles for additional strength* 750 lb. weight capacity - evenly distributed* Designed with web channel holes to allow multiple racks to be mounted side by side* Includes a bag of 50 each #12-24 mounting screws.* Comes unassembled* Color is BlackRack Accessories:For additional #12-24 mounting screws click here:Part # HW155-14-1224For floor mounting bolts click here:Part # HW140-14For wall mounting with a ladder rack click here:Part # HW600-1Additional links:Screws & NutsVertical Cable ManagementEquipment Rack ShelvesCable Management BarsLadder Racks
Mounting screws used to mount components to the equipment rack can be ordered under part #HW155-14-1224.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
Features:* Depth adjusts from 24" to 36".* Heavy duty steel upright channels* Extruded aluminum top and bottom angles* 19" wide rack mount* Front and rear upright mounting holes tapped #12-24 on EIA Standard spacing* Supplied with (2) top angles for additional strength* 750 lb. weight capacity - evenly distributed* Designed with web channel holes to allow multiple racks to be mounted side by side* Includes a bag of 50 each #12-24 mounting screws.* Comes unassembled* Color is BlackRack Accessories:For additional #12-24 mounting screws click here:Part # HW155-14-1224For floor mounting bolts click here:Part # HW140-14For wall mounting with a ladder rack click here:Part # HW600-1Additional links:Screws & NutsVertical Cable ManagementEquipment Rack ShelvesCable Management BarsLadder Racks
Depth adjusts from 24" to 36". Mounting screws used to mount components to the equipment rack can be ordered under part #HW155-14-1224.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 22" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This extended depth wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 22" Height x 25" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This extended depth wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 25" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mounted swing out rack is made for 19" racks.Mounting screws/bolts to mount the rack to the floor can be ordered under part #HW140-14.Features include:- A front swing out gate with hinges either from the right or left side.- Mounting rails that are tapped with #10-32 on EIA standard spacing. These screws can be ordered under part #HW155-13-1032.- Integrated strain relief tie off points which allow for flexible cable management.- Made from 12 gauge steel construction.- Rack includes assembly hardware and rack screws.- Comes with rear mounting holes which provide 16" centers for standard stud mounting and 18-5/16" centers that allow mounting on a 19" rack.- Can be quickly assembled.- Can handle up to 100 lbs.- Color is Black.Measures 48" Height x 18" Depth10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This wall mount equipment cabinet is made for 19" racks. Features include: - A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently. - Made from carbon steel. - Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet. - The lift off style rear hinge allows separation of the rear section for easy installation. - The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9. - Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section. - The sides of the center section are ventilated for maximum cooling. - There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan. - Can handle up to 100 lbs. - Color is Black. - Measures 24" Height x 24" Depth x 23" Width Has 22.5" of useable depth. 10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight or Will Call. Call for shipping cost quote. *** This wall mount equipment cabinet is made for 19" racks.Features include:- A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently.- Made from carbon steel.- Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet.- The lift off style rear hinge allows separation of the rear section for easy installation.- The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9.- Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section.- The sides of the center section are ventilated for maximum cooling.- There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan.- Can handle up to 100 lbs.- Color is Black.Measures 36" Height x 24" Depth x 23" WidthHas 22.5" of useable depth.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This wall mount equipment cabinet is made for 19" racks.Features include:- A Plexiglas front door that is field reversible to swing out from left to right.- Locks that are installed in the front door and rear section. They are keyed differently.- Made from carbon steel.- Comes with 1 pair of mounting rails which are zinc plated 14 gauge steel. - The mounting rails are tapped #10-32 on EIA standard spacing and are fully adjustable from front to rear. These screws can be ordered under part #HW155-13-1032.- The dual swing unit provides access to the rear of the cabinet.- The lift off style rear hinge allows separation of the rear section for easy installation.- The rear section is also field reversible with a left to right swing. In order to have the swing go the opposite way, an optional swing hinge kit is available to purchase under part #HW417-9.- Comes with 3" cable entry holes and two 1-1/8" knock outs on both the top and the bottom of the rear section.- The sides of the center section are ventilated for maximum cooling.- There is a covered fan hole on the top and bottom of the center section which allows for the future addition of a fan.- Can handle up to 100 lbs.- Color is Black.Measures 48" Height x 24" Depth x 23" WidthHas 22.5" of useable depth.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This pre-configured cabinet has everything you need to set up your networking rack.Contains:1 frame2 pair of cage nut rails2 solid side panels1 top with fan holes already drilled2 perforated doorsFeatures:- Comes with a heavy duty 14 gauge steel welded tubing construction which provides a 2000 lb. static load rating.- Made to withstand earthquakes up to Zone 4 seismic activity.- Is UL listed.- Comes with 2 pair mounting rails which are cage nut style, and punched on EIA 5/8-5/8-1/2" standard spacing and are fully adjustable from front to rear.- Has flush mounted removable doors that have perforated inserts that are field reversible without needing tools.- Has a flush mount fan top which allows for up to (4) 110 CFM fans to be placed on the cabinet top for maximum cooling.- Has an open base for a raised ventilation option.- The bottom corners are gusseted with both seismic tie downs and caster mount features.- Has four point leveling.- Color is Black.Fans for this cabinet are available for purchase separately under part #HW147-1.Measures 78" Height x 36" Depth x 24" WidthHas 34" of useable depth.Pallet dimensions are:89" Height x 41" Depth x 28" WidthTotal weight is 270 lbs.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
*** This item can only be shipped Freight. Call for shipping cost quote. *** This pre-configured cabinet has everything you need to set up your networking rack.Contains:1 frame2 pair of cage nut rails2 solid side panels1 top with fan holes already drilled2 perforated doorsFeatures:- Comes with a heavy duty 14 gauge steel welded tubing construction which provides a 2000 lb. static load rating.- Made to withstand earthquakes up to Zone 4 seismic activity.- Is UL listed.- Comes with 2 pair mounting rails which are cage nut style, and punched on EIA 5/8-5/8-1/2" standard spacing and are fully adjustable from front to rear.- Has flush mounted removable doors that have perforated inserts that are field reversible without needing tools.- Has a flush mount fan top which allows for up to (4) 110 CFM fans to be placed on the cabinet top for maximum cooling.- Has an open base for a raised ventilation option.- The bottom corners are gusseted with both seismic tie downs and caster mount features.- Has four point leveling.- Color is Black.Fans for this cabinet are available for purchase separately under part #HW147-1.Measures 84" Height x 36" Depth x 24" WidthHas 34" of useable depth.Pallet dimensions are:89" Height x 41" Depth x 28" WidthTotal weight is 270 lbs.10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K
This swing kit allows you the convert the rear mounting pan from a left hand swing to a right hand swing for the following cabinets:12U part #HW417-1218U part #HW417-1826U part #HW417-26Includes 3 hinges and can be easily installed with the factory pre-drilled holes.
This fan is a 110 CFM Axial fan. It comes with a 6' cord and is 115 Volts.It can be mounted in any of our cabinets that have fan holes in them.Has sealed bearings and two finger guards.
This cable management bar is zinc plated and made from 16 gauge carbon steel construction. It is 64.75" long.It is fully adjustable from front to rear.It can be mounted vertically to any cabinet that is 72" or taller.Provides holes at 1" intervals for cable ties.For mounting hardware:10/32 X 5/8 black screws can be ordered here HW155-13-1032-K12/24 X 5/8 black screws can be ordered here HW155-14-1224-KM6 X 16MM black screws can be ordered here HW155-60-M6-KNylon Trim Black Washers can be ordered here HW155-51-WASH-K10/32 Cage Nuts can be ordered here HW155-12-1032-KM6 Cage Nuts can be ordered here HW155-61-M6-K#8 x 1-1/2" Anchor Kits can be ordered here HW192-1#10 x 1" Anchor Kits can be ordered here HW192-2
This two piece construction fits 2-post equipment racks.It allows the rack to be moved providing total access to all sides of the rack.The casters include wheel locks.It is made from fully welded plate steel construction. Will not work with 4 post racks. Can handle loads up to 600 lbs.Hardware is included.Color is Black.
Provides a mounting surface on the back of the rack channel to tie down the cable runs.Formed from aluminum construction.Mounting screws are included.Sold individually.Color is Black.
Provides an adjustable brace to secure the equipment rack to the wall or ceiling.A threaded rod is NOT included.The kit includes: (4) brackets to make 2 swivel brackets, (2) 12" - 13 x 1-1/4" bolts, (2) 1/2" - 13 hex nuts, and (2) 1/2" split washers.
The kit contains all of the hardware necessary to secure equipment rack to the concrete floor.For use with 19" or 23" racks.The kit includes: (4) 3/8" - 16 concrete anchors, (4) 3/8" - 16 x 3-1/2" studs, (4) 3/8" split washers, (4) 3/8" - 16 hex nuts, and 3/8" fender washers.
This Grounding Bar has #12-24 tapped lug mounting holes on 1" centers.The kit includes: (1) 19" x 1" copper ground bar, (1) 2.5" x 1" splice plate, (2) #12-24 x 3/4" screws, and (8) #12-24 x 1/2" screws.
This Rack Block Mount Bar provides rack mounting for terminal blocks (66 and 110 types) and other equipment.Has #12-24 tapped holes which provide an infinite combination of mounting possibilities.Available for 19" rack mount.Made from heavy duty cold rolled steel angle.Zinc platedSold individually (Must buy 2 for a pair)
This 16 Outlet Power Strip for equipment racks mounts vertically on the equipment rack.Has a 15 Amp rating with a circuit breaker.Is UL listed.Is 48" in length with a 15' cord.Mounting hardware is included.
This 8 Outlet Power Distribution unit is made to mount on equipment racks.Has a 15 Amp rating with a circuit breaker.This item is UL listed.Is 1 Rack Mount Unit high and has a 15' cord.Mounting hardware is included.
This 19" 12 Outlet Power Distribution has 2 outlets in the front and 10 in the back. Has a 20 Amp rating with a circuit breaker. Is UL listed. Is 1 Rack Mount Unit high and has a 15' cord with a L5-20P plug on the cord end.
