Cable Joe® Cat 5E/6 & Fiber Cable Puller Tool!As seen at www.cablejoe.com This is BRAND NEW from the Original Equipment Manufacturer, OEM, and is what Leviton sells as p/n. 49001-JoeThis is the hot tool that every Telecom, CAT-5, Datacom, Video, Alarm and Structured Wiring installer wants and needs! The best solution available for pulling cables around corners and over long distances rapidly and with no damage! Cable Joe, Polygon Wire Management catalog number 9001-CJ, is the ultimate cable pulling tool. Just fasten the universal clamp to any convenient structure, Pipes, Joists, Studs, etc., open the frame, insert your cable bundle into the pulley system, and pull! When finished, just open the frame and remove the cables. Cable Joe does the work of two people! It reduces cable pulling time and install costs while getting installers off ladders. Now you can put installers at more productive locations, rather than feeding cables into troughs.Allows multiple cables to be pulled at one time. Guaranteed to save labor time !
Pull line is used for pulling cable through conduits and hard to reach places. This 6,500ft of blue/white line comes in a 5 gallon pail dispenser and has a tensile strength of 230lbs.
This mini telescoping retriever can save you time hunting for that wire inside the wall. The retriever is approximately 5" long collapsed and easily fits in your pocket. The retriever extends out 18" and has a hook at the end that will fit through a 1/4" hole.
This kit includes:- Four FiberFuse 6ft. push/pull rods with male and female threaded connector ends.- One FiberFiber 6ft push/pull rod with a fixed Null nose end and female threaded connector end.- Luminous Whisk Threaded Connector Tip- Ball Chain Lanyard (12" length)- Kit is packaged in a clear square plastic tube
This simple 3 piece system includes three varying length rods for a total of 9 feet. This is perfect for standard construction, single level wall fishing.This kit includes:- One 2ft rod with a Bullnose style connector on one end, and a female threaded connector on the opposite end.- One 3ft rod with a male threaded connector on one end and a female threaded connector on the opposite end.- One 4ft rod with a male threaded connector on one end, and a Bullnose style connector on the opposite side.Installers Tip:Each rod can be combined to form a variety of lengths from 2ft to 9ft. This kit is ideal for those new or occasional installers who borrow your standard rod kit and either do not return them or return them damaged!
Grab wire "loops" or hook objects to retrieve. Use this tip for pulling wire from a distance or retrieving fish tapes.
Fish wire way back in a small cavity. Unique inside knife edge securely grabs and holds the wire. Outside "V" allows you to push or lay-up wire. If you can touch the wire with the Z-tip, you can retrieve it!
Use this collapsible reel holder to quickly set up your wire spools on-site.Capable of handling reel weights of up to 300 lbs.Has anti-slip rubber feet which provide grip to prevent sliding and scratching on the floor.
These economical FIBERFUSE fiberglass rod pushers are fluorescent green in color and reflect light shined on them. The rods are .162" in diameter, flexible, yet retain memory to straight. These rods are simple fiberglass blanks with a ground flat end and a hole drilled through to attach wire and push.These are the original "Glo Rods" first offered in 1986.
The Grabbit telescoping poles are constructed of non-conductive, lightweight, friction locking fiberglass. This tool is indispensable for running (pushing or pulling) wires or cables through limited access areas and false ceilings.The Grabbit is designed for both residential and commercial installations. The tool, includes the patented Z-tip wire "grabber" tip. The inner V of the Z-Tip has a double knife edge designed to literally grab the wire insulation without cutting the actual metal wire, while the outer V (without knife edge) is designed to push a wire loop. The Grabbit is made up of three sections and when collapsed is just under 55" and weighs less than 3lbs. When extended the Grabbit will reach to 12ft.
The Grabbit telescoping poles are constructed of non-conductive, lightweight, friction locking fiberglass. This tool is indispensable for running (pushing or pulling) wires or cables through limited access areas and false ceilings.The Grabbit is designed for both residential and commercial installations. The tool, includes the patented Z-tip wire "grabber" tip. The inner V of the Z-Tip has a double knife edge designed to literally grab the wire insulation without cutting the actual metal wire, while the outer V (without knife edge) is designed to push a wire loop. The Grabbit is made up of five sections and when collapsed is just under 58" and weighs less than 5lbs. When extended the Grabbit will reach to 18ft.
The Wet Noodle is one of the installers' most valuable tools.How to use the Wet Noodle System: Create a small hole for an entry point up on the wall (The Wet Noodle works best in un-insulated walls) and drill a small hole at the bottom directly below (1/4" hole for the small magnet end or 3/8" for the bigger end). Drop the Wet Noodle ball chain down giving it a slight jiggle to make sure it finds the bottom plate. In most cases you will "catch" the ball chain by just putting the magnet end(s) into the bottom hole. If necessary, bend the flexible retriever into an "S" shape to get into the wall for more difficult retrievals. Slowly pull the ball chain to just inside the bottom hole. Using the pocket retriever, hook the ball chain and bring it out the bottom hole.This tool kit provides a quick and easy solution for in-wall blind wire pulling making it truly indispensable.
These flashlights clip easily on your Grabbit poles.These small LED flashlights come with a slide-on custom mount to easily secure to the tip end of your Grabbit telescoping poles. Just securely slide one onto the small end section of your Grabbit pole with a friction fit to provide focused light on the Grabbit Z-Tip or other specialized Grabbit tips. Capture wire easily with the bright focused light. Removed from your pole before collapsing for storage. Packaged in a convenient 2-Pack with two lights and two mounts.
Wire pulling aid with built-in rollers. Mounts to all boxes and rings.
1/2” Polyester Pulling Tape – 3000ft
Conduit Measuring Tape – 3000ft W/ Sequential Markings.
