Condition:  New
Mfg:  Abergetty
P/N:  EQ300-4

* USB 2.0 and USB 1.1 compliant
* Supported data speed 1.5/12/480 Mbps.
* One stream and four downstream ports.
* Hot swappable plug and play connection.

Condition:  New
Mfg:  Abergetty
P/N:  EQ300-5

This USB Hub allows you to save precious USB ports on your desktop or laptop computer by plugging up to four peripheral devices into just one port.

•  Supports high-speed ( 480 Mbps ), full-speed ( 12 Mbps ), and low-speed ( 1.5
  Mbps ) data transfer rate.
• Works with Windows 98/ME/2000/XP/Vista/7, Linux and Mac OS v9.2 or higher.
  
• Supports simultaneous operation of multiple USB
  2.0 and USB 1.1 devices.
• Truly plug and play automatic system
  configuration.
• Indicated LED ports.
• USB 2.0 compliant supporting up to
  4 USB ports.
• Output current per-port : 500 mA.
• Switching power adapter 5V/2A DC included

Condition:  New
Mfg:  Abergetty
P/N:  EQ300-6

This USB 2.0 10-Port Hub allows you to add multiple devices to your desktop or laptop computer while only using one port.

* USB 2.0 high-speed interface, supports data rates of 1.5/12/480 Mbps
* Backwards compatible with USB 1.1
* Supports bus-powered (without power adapter) and self-powered (with power adapter) modes
* Plug-and-Play; hot-plugging
* Over-current detection and protection
* Automatic connection and speed detection

Package Contents

* USB 2.0 10-Port Hub x1
* Power Adapter x1
* USB Cable x1

Condition:  New
Mfg:  Abergetty
P/N:  EQ300-7

This device is a 10/100Mbps Ethernet adapter and 3 port integrated hub all in one. This USB/Ethernet adapter allows users to easily connect to the Ethernet network with a complete out of the box, Plug-N-Play solution.

LAN

• For 10/100M LAN port RJ45
• Compliant with USB 2.0 and USB 1.1 specifications
• Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards
• Supports both full-duplex and half-duplex operations
• Powered by the USB port. No external power adapter required

HUB

• 3 180° USB ports
• Compliant with USB 2.0 (Data Rate 1.5/12/480 Mbps)
• Daisy chain-able up to 127 USB Devices
• Bus-power and self-power mode used (Power adapter not included)
• Over-current detection and protection
• Plug-and-play
  
  
  
  

System Requirements

• Operating Systems: Windows 2000/2003/XP/Vista/7
• Mac OS X v10.3 or later
• One available USB port
  

Condition:  New
Mfg:  Abergetty
P/N:  EQ300-3

* Compliant with USB3.0 , down compatible with USB2.0/1.1
* Support the following speed data rate as follows: Low-speed(1.5Mbps)/Full-speed(12Mbps)/
High-speed(480Mbps)/Super-speed(5Gbps)
* One upstream to connect with USB3.0 host, four downstream to connect with
USB3.0 device
* One port for USB power charger
* Individual port swiitch
* Power : Input: DC 5V (power supply included
!ESupport Win XP/Vista/Win7/MAC OS